KSB is First Reactor Coolant Pump Manufacturer to be Certified for Modern Nuclear Power Plants in China

The prototype of the RUV pump has successfully passed the demanding tests in Lingang (China) where it proved its continuous operating reliability, for example. All measured values met or even exceeded the official test specifications. In total the pump set was in operation for more than 700 hours, out of which more than 500 hours at a temperature of over 284 °C. In accordance with the test specifications the pump, which has a drive rating of about 7.5 megawatts, was started and stopped in excess of 550 times. When dismantled after testing, all components were in perfect condition.

The prototype of the RUV pump has successfully passed the demanding tests in Lingang (China) where it proved its continuous operating reliability, for example. All measured values met or even exceeded the official test specifications. In total the pump set was in operation for more than 700 hours, out of which more than 500 hours at a temperature of over 284 °C. In accordance with the test specifications the pump, which has a drive rating of about 7.5 megawatts, was started and stopped in excess of 550 times. When dismantled after testing, all components were in perfect condition.

"The successful certification is an important milestone for KSB following a development period of close to ten years. It underlines our position as a technology leader in the nuclear market. This is a good starting point for us in the growing Chinese energy market. We are expecting to receive orders that will safeguard jobs also in Germany," says Dr Stephan Bross, member of Management of KSB SE & Co. KGaA.

- Picture is available at AP Images (http://www.apimages.com) -

Contact
KSB SE & Co. KGaA
Corporate Communications
67227 Frankenthal  

Wilfried Sauer
Tel. +49 6233 86-1140
[email protected]